Also

Garden paths. DIY design elements

Garden paths. DIY design elements


We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Garden paths are more than just a winding strip that allows you to move comfortably around the garden.

It carries not only a functional load, but is also an element of the decorative design of your site.

Therefore, it is very important that their appearance blends harmoniously with the overall style of the landscape.

To do this, you need to carefully consider where and how to lay the paths, and most importantly, determine the direction, purpose and their design. As a rule, the house is taken as the starting point, and the main route is laid without sharp turns.

As for the garden paths for walking, which are encircled by shrubs or rockeries, it is better to make them winding.

Planting pears in the fall - recommendations for all novice gardeners.

Find out all the details of cherry pruning sad / plodoviy / uxod / obrezka-chereshni-letom-pervaya-posleduyushhaya-i-zavershayushhaya.html.

See pictures of a vine here.

Concrete garden paths

The most popular material for garden paths is concrete or slabs. The slab can also be made of concrete or natural stone. Sometimes, a person who does not have special knowledge does not notice the difference between them.

Thanks to modern technologies, concrete can completely imitate the texture of natural stone, and it is much cheaper.

Also, capital paths are made of concrete in those areas where heavy loads are expected.

For these purposes, a shallow bed is dug, about 15 cm. In places where melt or rain water accumulates, it is necessary to ensure its drainage.

Sand is poured at the bottom of the bed, which is leveled and well compacted.

This drainage layer should be no more than 5 cm. On the sides, the bed is framed with a special border tape, but if it is not there, then it can be replaced with old linoleum or roofing felt, cut into ribbons.

Often this foundation is made at ground level. However, if you want to make the garden path higher, then boards or strips of laminated plywood are used for formwork.

To avoid the destruction of the concrete base, it is equipped with thermal seams, or reinforced.

We build our own decorative wood fence.

Learn how to make a trellis for climbing plants postrojki / sadovye-postrojki / dekorativnye-sooruzheniya / stroitelstvo-shpaler-dlya-vinograda-svoimi-rukami.html.

Natural stone, pebble or crushed stone paths

What could be more beautiful and graceful than natural material? Natural stone paths look great where elements such as rockeries, rock gardens and retaining walls are present. That is, wherever there is a stone in the garden design. These tracks are very easy to make yourself.

It is enough to order a stone and lay it close to the prepared drainage, or leave a small distance between the stones, which is then covered with small stone chips or pebbles.

Gravel, crushed stone or pebbles are perfect for paving paths, they are not only cheaper, but also much easier to work with.

They fit perfectly into any landscape design style and blend perfectly with garden architecture.

For example, an oriental-style garden is characterized by small areas covered with gravel, with a graphic design made on it. Such techniques give the garden an aesthetic and mysterious look.

Garden path from a tree trunk and a bar

For many, it becomes a real discovery that paths made of unremarkable material like trunks and branches of sawn garden trees can decorate a suburban or summer cottage area.

To create such a path yourself, you need to prepare a powerful saw, drying oil, plastic wrap and a sawn tree. Then we proceed to sawing the trunk into small circles, the thickness of which will be 10-15 cm. It will look more effective if the diameter of the trunks is different.

The next stage of work will be heating the drying oil to a boil and covering all circles. While the circles are drying, you need to prepare the track itself.

Having clearly defined its width and location, it is necessary to remove 45 cm of soil, cover it with plastic wrap and pour sand. Dry cuts are laid out on a well-rammed sand pillow.

Tracks made of asymmetric timber look no less interesting, which gives it an original appearance. But, if you need a strong and comfortable track, then it is better to choose a thick and wide beam.

Pine bark, sand, gravel and granite screenings can be used with the timber. However, it is worth noting that it is better not to use more than three elements, as this will disturb the balance and rhythm of the track.

Tips for building a wooden country shower.

Learn how to make a bench postrojki / sadovye-postrojki / dekorativnye-sooruzheniya / tehnologiya-sozdaniya-sadovoi-skamejki-dlya-dachi-svoimi-rukami.html.


Watch the video: 48+ Awesome Garden Path and Walkway Ideas Design. Ideas And Remodel (July 2022).


Comments:

  1. Acheron

    In my opinion, you are making a mistake. Email me at PM, we will talk.

  2. Yozshuramar

    What a luck!

  3. Moriarty

    Fascinating answer



Write a message